FEATURES:

• BHARTIYA "Push Type" internal tube cutter quickly cuts through the walls of ferrous tubes in condensers and Heat exchanger as step in their removal from the tube sheet.
• This sturdy "Push Type" internal tube cutters can be used with a portable Electric or Air Drill Motor.
• "Push Type" cutter is simple to operate. Merely insert it into the tube. Apply power press inward and the tube can be cut in few seconds. Releasing of inward pressure automatically retracts the Cutter Bit. This cutter is equipped with an adjustable collar suitable for reaching into tubes at various depths.
• The replaceable cutting bit can be interchanged in a few seconds. Standard adjustable reach is 4" (101.6mm) and they are available in optional

Tube O.D. Tube Gauge (BWG) Spare cutting Bit Model No. Tube Cutter Model No. (Std. Reach) 5/8" 14-22 BATP-625-SB BATP-625 3/4" 14-22 BATP-750-SB BATP-750 7/8" 14-22 BATP-875-SB BATP-875 1" 12-22 BATP-1000-SB BATP-1000 1.1/4" 12-22 BATP-1250-SB BATP-1250 1.1/2" 12-22 BATP-1500-SB BATP-1500

FEATURES:

• The internal tube cutter BPR-68 is driven via the square in a clockwise direction using either an electric, pneumatic, or hydraulic driving machine.
• BPR-68 tube cutters are ideal for cutting thick walled boiler tubes of 2" O.D. & higher.
• BPR-68 type tube cutters are available in standard reach of 4" (100mm). Additional reaches in increments of 4" are available up to 16" (400mm)

Tool Model Number Size Spare Bit Model Number Tube I.D. Range Max. Tube O.D. Body Diameter Drive Square Male Inch Mm Inch Mm Inch Mm B680951 095 B1680951 .394 - .472 10-12 .591 15 .374 9.5 ½'' B681051 105 .433-.512 11-13 .709 18 .413 10.5 B681151 115 B1681151 .472-.551 12-14 .748 19 .453 11.5 B681251 125 B1681251 .519-.591 13-15 .787 20 .492 12.5 B681351 135 .551 - .669 14-17 .906 23 .531 13.5 B681551 155 .630 - .748 16-19 .984 25 .610 15.5 B681751 175 B1681751 .709 - .827 18-21 1.063 27 .689 17.5 B681951 195 B1681951 .787 - .984 20-25 1.339 34 .768 19.5 B682451 245 B1682451 .984-.181 25-30 1.496 38 .965 24.5 B682901 290 B1682901 1.181 -.376 30-35 1.963 43 1.142 29 B683301 330 1.378-1.575 35-40 1.890 48 1.299 33 B683801 380 1.575- 1.969 40-50 2.126 58 1.496 38 B684801 480 B1684801 1.969-2.362 50-60 2.677 68 1.890 48 ¾'' B685301 530 2.165-2.559 55-65 2.874 73 2.087 53 B686301 630 2.559-2.953 65-75 3.268 83 2.480 63 B687301 730 B1687301 2.953-3.346 75-85 3.661 93 2.874 73 B688301 830 3.346-3.740 85-95 4.055 103 3.268 83 B689301 930 3.740-4.134 95-105 4.449 113 3.661 93

FEATURES:

• Simple Design: Only two major parts reduce inventory
• No power needed: Manual insertion and removal of tube with a hand wrench. Ideal for field service application.
• Ease of use: Hex at back of spear allows tightening without disassembly of thrust mechanism.
• Range of Sizes: A wide range of sizes allows use on popular tube size. Clarity of marking: Both spear & thrust collar are clarify marked for last relating tool to job
• Larger sizes can be mad e available on request.

Tube Size Tube Puller Model No. Tube Puller Model No. O. D. BWG Wall Thickness I.D. Inch Mm Inch Mm Inch Mm 1/4 6.35 18 0.049 1.24 0.152 3.86 BMTP-25-18 BMPS-25-18 3/8 9.52 16 0.065 1.65 0.245 6.22 BMTP-38-16 BMPS-38-16 3/8 9.52 18 0.049 1.24 0.277 7.04 BMTP-38-18 BMPS-38-18 3/8 9.52 20 0.035 0.88 0.305 7.75 BMTP-38-20 BMPS-38-20 1/2 12.70 14 0.083 2.11 0.334 8.48 BMTP-50-14 BMPS-50-14 1/2 12.70 16 0.065 1.65 0.370 9.40 BMTP-50-16 BMPS-50-16 1/2 12.70 18 0.049 1.24 0.402 10.21 BMTP-50-18 BMPS-50-18 1/2 12.70 20 0.035 0.88 0.430 10.92 BMTP-50-20 BMPS-50-20 5/8 15.88 14 0.083 2.10 0.459 11.66 BMTP-63-14 BMPS-63-14 5/8 15.88 16 0.065 1.65 0.495 12.57 BMTP-63-16 BMPS-63-16 5/8 15.88 18 0.049 1.24 0.527 13.39 BMTP-63-18 BMPS-63-18 5/8 15.88 20 0.035 0.88 0.555 14.10 BMTP-63-20 BMPS-63-20 3/4 19.05 14 0.083 2.10 0.585 14.86 BMTP-75-14 BMPS-75-14 3/4 19.05 16 0.065 1.65 0.620 15.75 BMTP-75-16 BMPS-75-16 3/4 19.05 18 0.049 1.24 0.652 16.56 BMTP-75-18 BMPS-75-18 3/4 22.22 20 0.035 0.88 0.680 17.27 BMTP-75-20 BMPS-75-20 7/8 22.22 14 0.083 2.10 0.709 18.01 BMTP-87-14 BMPS-87-14 7/8 22.22 16 0.065 1.65 0.745 18.92 BMTP-87-16 BMPS-87-16 7/8 22.22 18 0.049 1.24 0.777 19.74 BMTP-87-18 BMPS-87-18 7/8 25.40 20 0.035 0.88 0.805 20.45 BMTP-87-20 BMPS-87-20 1 25.40 14 0.083 2.10 0.834 21.18 BMTP-100-14 BMPS-100-14 1 25.40 16 0.065 1.65 0.870 22.10 BMTP-100-16 BMPS-100-16 1 25.40 18 0.049 1.24 0.902 22.91 BMTP-100-18 BMPS-100-18 1 25.40 20 0.035 0.88 0.930 23.62 BMTP-100-20 BMPS-100-20

The BHARTIYA Facing Machine is a powerful yet portable yet portable fixture designed to self-align and amount on tubes for fast tube end facing & chamfering in constrained spaces.

FEATURES:

• Drive: Electric, Hydraulic, Pneumatic
• Range of tube end facing, external or internal bevelling and weld seam machining tools bits.
• Quick interchangeability of pilot to suit range of inside diameters.
• Power & range combined in light & portable design.
• Modular & Erogonomic design.

FACING ATTACHMENT:

Locking Tube Range (I. D.) 28-82 Weight (kg) 6.8 Model BFM-3500

DRIVE:

MOTOR ELECTRIC HYDRAULIC PNEUMATIC Speed (rpm) 70 480 135@500 1pm Torque (Nm) 138 140 84 Weight (Kg) 2.8 5.6 1.8 Model FMD-E FMD-H MD-P